Pricing
What plumbing costs
Exact prices for most of the plumbing we do in Kitchener-Waterloo, Cambridge, Guelph, Stratford, Woodstock and Halton, in Canadian dollars before HST. They are the same prices Instant Estimate gives, and the plumber confirms yours before any work starts.
$175 visit minimumPlus HST
Job doneVisit included. Priced at $280? You pay $280.$0
No work doneThe visit minimum. That's all you pay.$175
Covers travel and up to an hour on site to price the job.
Drain and sewer prices
- Clearing a clogged sink, tub or shower drainAssumes the drain clears from the fixture or its trap.$350
- Clearing a basement floor drainAssumes the blockage is within 50 feet of the drain.$395
- Clearing a main drain or sewer lineAssumes a cleanout we can reach and a blockage within 100 feet.$450
- Hydro jetting a drain lineAssumes a cleanout we can reach and up to 100 feet of line.$795
- Drain camera inspectionUp to 100 feet, through a cleanout we can reach. If we then do the repair, the inspection price comes off it.$295
- Pre-purchase plumbing inspectionOne home: we inspect and test the accessible fixtures, supply pipes, shut-offs, water heater and visible drains, and tell you what needs attention.$395
- Clearing tree roots from a sewer lineAssumes a cleanout we can reach. Repairing a broken pipe is a separate price.$550
- Tracking down a sewer smellTypical range. More if a drain or vent pipe is broken inside a wall.First step: a camera inspection, $295.$250 – $600
- Air admittance valveTypical range. More if a proper vent pipe has to be run instead.First step: a $175 service call.$300 – $600
- Sewer smoke testTypical range. More if the house has several stacks or an addition.First step: a $175 service call.$350 – $700
- Sewer line repairTypical range. More if the whole line needs replacing.First step: a camera inspection, $295.$2,500 – $8,000
- Sewer line replacementTypical range. More if the line is deep or under a driveway.First step: a camera inspection, $295.$12,000 – $25,000
- New septic systemTypical range. More if the site needs a raised or tertiary system.First step: a free on-site estimate.$25,000 – $50,000
- Cast-iron drain or stack replacementTypical range. More if the drain under the basement floor has to be replaced too.First step: a free on-site estimate.$1,500 – $4,500
- Cleanup after a sewer backupTypical range. More if the sewer line needs replacing.First step: a camera inspection, $295.$500 – $2,000
- Backwater valve installationTypical range. More if the drain is deep or the floor is finished.First step: a camera inspection, $295.$2,000 – $4,500
- Weeping tile repairTypical range. More if the system has to be replaced.First step: a camera inspection, $295.$1,500 – $6,000
- Catch basin or yard drain cleaningOne basin we can reach.$395
Leak and pipe repair prices
- Fixing a leak under a sinkOne part: the trap, a supply line, the strainer or a connection.$295
- Repairing a leaking pipeOne leak on copper or PEX that we can reach without opening a wall or ceiling.$395
- Tracing a hidden leak behind a wall or ceilingFor a wet spot on a wall or ceiling, or dripping you can hear but not see. We find where the water is coming from, opening the drywall where needed, and give you the repair price before fixing it. We don't patch drywall.$250
- Burst pipe repairTypical range. More if several lines split inside walls.First step: a $175 service call.$300 – $1,200
- Thawing a frozen pipeTypical range. More if the pipe split while frozen.First step: a $175 service call.$250 – $700
- Fixing banging pipesAn exact price for each usual fix. The plumber confirms which one before any work.From $250
- Shut-off valve replacementA valve under a sink, toilet or appliance.$295
- Main shut-off valve replacementA valve we can reach, on a 3/4-inch or smaller line.$645
- Outdoor tap repairLike-for-like, with the pipe reachable from inside.$450
- Capping or removing an irrigation lineTypical range. More if the backflow device has to come out and the line be capped at the main.First step: a $175 service call.$250 – $700
- Outdoor tap with a new pipe runTypical range. More if the line runs through finished ceilings and walls.First step: a $175 service call.$600 – $1,200
- Poly-B pipe replacementTypical range. More if walls and ceilings need more opening.First step: a free on-site estimate.$4,000 – $9,000
- Kitec pipe replacementTypical range. More if walls and ceilings need more opening.First step: a free on-site estimate.$5,000 – $10,000
- Whole-home repipingTypical range. More if walls and ceilings need more opening.First step: a free on-site estimate.$5,000 – $12,000
- Main water line repairTypical range. More if the whole line needs replacing.First step: a free on-site estimate.$1,500 – $5,000
- Moving a water meterTypical range. More if the water line from the floor has to move too.First step: a $175 service call.$600 – $1,200
- New water line to an appliance or aquariumTypical range. More if the line runs through finished walls or ceilings.First step: a $175 service call.$350 – $900
- Radiator removal and reinstallTypical range. More if the heating system has to be drained and refilled.First step: a $175 service call.$400 – $900
- Whole-home plumbing flushTypical range. More if the water heater and softener need flushing too.First step: a $175 service call.$300 – $600
- Winterizing plumbingTypical range. More if the house has several bathrooms or a boiler to drain.First step: a $175 service call.$250 – $600
- Repairing a leaking drain pipeTypical range. More if the cast-iron stack has to be replaced.First step: a $175 service call.$250 – $800
- Replacing a section of water pipeTypical range. More if the old pipe runs through finished walls and ceilings.First step: a free on-site estimate.$800 – $2,500
- Capping or removing a gas lineTypical range. More if the appliance has to come out and the line removed back to the meter.First step: a $175 service call.$350 – $900
- Fire sprinkler head replacementTypical range. More if the sprinkler piping is damaged or several heads need replacing.First step: a $175 service call.$400 – $800
- Humidifier water lineTypical range. More if a new line has to be run from farther away.First step: a $175 service call.$250 – $500
- Smart water shut-off installationTypical range. More if the main line needs re-piping to fit it.First step: a $175 service call.$450 – $700 if you supply it.$1,000 – $1,600
Toilet, faucet and fixture prices
- Clearing a clogged toiletAssumes it clears with an auger from the bowl.$295
- Fixing a running or weak-flushing toiletOne part inside the tank.$275
- Fixing a toilet leaking at the baseAssumes the floor under the toilet is sound.$350
- Toilet replacementAn exact price for the one you pick, with the old one taken away.From $725
- Faucet repairCommon brands such as Moen, Delta, American Standard and Riobel.$295
- Faucet replacementAn exact price for the one you pick.From $410
- Sink replacementAn exact price for the one you pick, with the old one taken away.From $780
- Vanity replacementAn exact price for the one you pick, with the old one taken away.From $1,100
- Laundry or utility sinkAn exact price for the one you pick, with the old one taken away.From $755
- New laundry tub where there isn't oneTypical range. More if a pump is needed to drain it.First step: a $175 service call.$900 – $1,800
- Shower valve or cartridge repairCommon brands such as Moen, Delta, American Standard and Riobel.$295
- Shower valve replacementTypical range. More if the valve can only be reached by opening tile.First step: a $175 service call.$700 – $1,400
- Shower head replacementAn exact price for the one you pick.From $250
- Tub or shower drain leakAn exact price for each usual fix. The plumber confirms which one before any work.From $295
- Shower base replacementTypical range. More if the walls, tile or subfloor around it need rebuilding.First step: a free on-site estimate.$2,000 – $3,500
- Shower door installationTypical range. More if the door is custom glass or the frame needs rebuilding.First step: a $175 service call.$300 – $700
- Recaulking a tub, shower or counterTypical range. More if water has got behind the tile and the wall or drain needs repair.First step: a $175 service call.$250 – $400
- Bathtub replacementTypical range. More if walls or the floor need rebuilding.First step: a free on-site estimate.$900 – $2,500 if you supply it.$1,500 – $4,000
- Walk-in or accessible tub insertTypical range. More if the tub, valve or walls have to be rebuilt.First step: a free on-site estimate.$1,300 – $3,000
- Garbage disposal repair or replacementAn exact price for the one you pick.From $565
- Dishwasher hookupAn exact price for the one you pick, with the old one taken away.From $335
- First-time dishwasher hookupTypical range. More if the cabinets or the sink drain need rework.First step: a $175 service call.$450 – $900
- Dishwasher water or drain line repairTypical range. More if the sink drain under the counter needs rebuilding.First step: a $175 service call.$250 – $650
- Disconnecting and capping an appliance lineOne dishwasher, washer, fridge or other appliance: we disconnect its water line or drain and cap it so nothing leaks. Not gas lines.$250
- Fridge water line hookupWe connect the fridge to the water line and shut-off already behind it, replace the line if it's worn, and check for leaks.$250
- Washer hookup or washer box leakValves or a washer box we can reach.$395
- Bidet installationAn exact price for the one you pick.From $295
Water heater prices
- Water heater repairAn exact price for each usual fix. The plumber confirms which one before any work.From $250
- Expansion tank replacement or installationBeside the water heater.$405
- Water heater replacementAn exact price for the one you pick, with the old one taken away.From $1,410
- Large or commercial water heater replacementTypical range. More if the venting, gas line or electrical supply needs upgrading.First step: a free on-site estimate.$2,700 – $4,500
- Heat pump water heater installationTypical range. More if a new circuit or condensate drain is needed.First step: a free on-site estimate.$3,500 – $6,000
- Removing and refitting a water heaterTypical range. More if the gas line or venting has to be redone to put it back.First step: a $175 service call.$350 – $800
- Tankless water heater serviceAssumes service valves are already installed on the heater.$295
- Tankless water heater installationTypical range. More if gas or venting needs major upgrading.First step: a free on-site estimate.$1,500 – $3,000 if you supply it.$4,000 – $7,000
Sump pump and water treatment prices
- Fixing low water pressureAn exact price for each usual fix. The plumber confirms which one before any work.From $250
- Sump pump repairAn exact price for each usual fix. The plumber confirms which one before any work.From $250
- Sump pump replacementAn exact price for the one you pick, with the old one taken away.From $710
- Sump pit replacementTypical range. More if the weeping tile connections at the pit need repair.First step: a free on-site estimate.$1,800 – $3,500
- Sump pit vacuum or flushTypical range. More if the weeping tile needs jetting from the pit.First step: a $175 service call.$300 – $800
- Battery backup sump pumpAn exact price for the one you pick.From $1,370
- Sewage ejector pumpAn exact price for each usual fix. The plumber confirms which one before any work.From $350
- Septic or effluent pump replacementTypical range. More if the pump chamber, floats or the line to the bed need replacing.First step: a $175 service call.$1,500 – $3,500
- Well pump repairAn exact price for each usual fix. The plumber confirms which one before any work.From $295
- Well pump replacementTypical range. More if the pump is down the well and has to be pulled.First step: a $175 service call.$1,400 – $2,500
- New well pump and water lineTypical range. More if the trench is long or through rock.First step: a free on-site estimate.$8,000 – $15,000
- Cistern repairTypical range. More if the tank has to be replaced.First step: a free on-site estimate.$500 – $3,000
- Water softener repairAn exact price for each usual fix. The plumber confirms which one before any work.From $250
- Water softener installationAn exact price for the one you pick, with the old one taken away.From $1,525
- First water softener installationTypical range. More if the main line needs re-piping to add the loop.First step: a free on-site estimate.$1,800 – $3,200
- Reinstalling or moving a water softenerTypical range. More if a new loop has to be piped in.First step: a $175 service call.$250 – $800
- Water filtration systemAn exact price for the one you pick.From $530
- Reverse osmosis drinking water systemAn exact price for the one you pick.From $590
- Water pressure booster pumpTypical range. More if a larger pump or a pressure tank is needed.First step: a free on-site estimate.$1,800 – $3,000
- Backflow preventer testingPrice per device.$250
Renovation plumbing prices
- Basement bathroom rough-inTypical range. More if the floor has to be trenched or a pump is needed.First step: a free on-site estimate.$3,000 – $8,000
- Bathroom renovation plumbingTypical range. More if drains and supply lines are moved.First step: a free on-site estimate.$2,500 – $8,000
- Kitchen renovation plumbingTypical range. More if the sink or drains are moved.First step: a free on-site estimate.$1,500 – $5,000
- Plumbing permit and inspectionsTypical range. More if drawings or an engineer are needed.First step: a free on-site estimate.$500 – $2,000
Commercial plumbing prices
- Grease trap cleaningAn exact price for each usual fix. The plumber confirms which one before any work.From $395
- Commercial drain clogTypical range. More if the building sewer needs replacing.First step: a $175 service call.$300 – $900
- Commercial fixture repair or replacementTypical range. More if the fixture has to move or the building's supply or drain lines need replacing.First step: a free on-site estimate.$400 – $2,500
- Commercial plumbing projectTypical range. More if the building's water service or drains need upsizing.First step: a free on-site estimate.$5,000 – $40,000
- Multi-unit or new-build plumbingTypical range. More if the building has many units or needs new water and sewer services.First step: a free on-site estimate.$10,000 – $80,000
These prices are estimates. Each one is for the job as written under it, and the plumber confirms it on site. If the job is different on site, you get the new price before any work starts, and you can say no.
How pricing works
Your exact price first, confirmed on site
Most jobs have an exact price: one flat rate for the job, not an hourly meter.
It is an estimate until the plumber has seen the job. They confirm it on site, and if the job is different from what was described, you get the new price before any work starts.
You approve the price, then the work starts.
Not sure which job is yours?
Add a photo and Instant Estimate works out the job and gives you its exact price in seconds, with what it covers. Pick the fixture where there is a choice. It is an automated, non-binding estimate, and you can book at that price.
Get an Instant EstimateThe visit minimum
Booked online, a weekday visit has a $175 minimum plus HST once the plumber is on site. When the job is done, it is included in your price. You only pay it on its own if no work is done.
Book OnlineRenovations and larger projects
Estimates are free for renovations and any project over $2,000. No service call fee. That covers new builds and commercial work of any size.
Request an estimateLooking for one job in particular? Every service page has its own prices and what changes them.
Questions
Pricing questions
Are these exact prices?
For most jobs, yes. One price is the price for that job as written under it. "From" means the price depends on what you pick (the toilet, the water heater) or which usual fix it turns out to be, and each choice has its own exact price in Instant Estimate. A few jobs, like sewer lines and repiping, can't be priced until we see them, so they show the typical range and an exact first step.
Is the price final?
It is an estimate until the plumber has seen the job. They confirm it on site before any work starts. If the job is materially different from what was described, you get the new price first, and you can say no.
Is the $175 added on top of the price?
No. It is the minimum once a plumber is on site, and it is included in your price when the job is done. If no work is done, it is all you pay: $175.
Is an estimate for a renovation or a larger project free?
Yes. Estimates are free for renovations and any project over $2,000. No service call fee.
Do you charge by the hour?
No. You get one flat-rate price for the job before it starts.
Do you come out evenings and weekends?
For emergencies, yes: leaks, clogs and sump pumps. Outside Monday to Friday, 9 am to 5 pm, an emergency costs 50% more than the prices on this page, and the service call is $300. Planned work is done on weekdays only, never on a Saturday or Sunday.
Do you charge for travel?
No. There is no travel charge anywhere we serve.
Do you take a deposit?
Only on jobs over $3,000: a 40% deposit to book. Jobs of $3,000 or less need no deposit.
Are these prices before tax?
Yes. Every price on this page is in Canadian dollars before HST.
What if the job turns out to be bigger than expected?
We stop and tell you. You get a new flat-rate price for the bigger job before any of it starts, and you can say no.

