Burlington, Oakville, Milton and Halton Hills
Halton basement flooding subsidy
Halton Region helps homeowners pay for the plumbing that keeps sewage and stormwater out of a basement. This is what the program covers, who qualifies, and how the work fits around the application.
Enhanced Basement Flooding Prevention Subsidy Program
What the subsidy pays for
- Weeping tile disconnection and sump pump100% of the cost, up to $6,500For disconnecting weeping tile from the sanitary sewer and installing a sump pump to take that water instead. Water-powered backup pumps are not covered.
- Backwater valve50% of the cost, up to $1,600For a valve on the main drain, installed inside the house. Valves installed outside are not covered, and the subsidy is paid once per property.
- Sewer lateral lining and repair50% of the cost, up to $4,000For lining or repairing the pipe that carries wastewater from the house to the street.
- Downspout disconnection100% of the cost, up to $900For taking downspouts off the sewer so roof water runs onto the ground, away from the foundation.
Amounts are Halton Region's, for work completed after July 15, 2024, as published when this page was checked in November 2026. The Region sets the rules and can change them. Confirm on halton.ca or by calling 311 before you start.
Eligibility
Who qualifies
- The home is in Burlington, Oakville, Milton or Halton Hills.
- It is connected to Halton Region's municipal wastewater system. Homes on a septic system are not eligible.
- You apply within one year of the work being completed.
- For a backwater valve, you can show that downspouts and weeping tile are not connected to the sanitary sewer, or that they will be disconnected first.
One thing to ask the Region first
Halton has kept a list of approved contractors for weeping tile and sump pump work, and has been moving to let homeowners choose their own. Before you book that work with anyone, ask the Region which rule applies to your application.
Step by step
How it works
- 1Find out what the house is connected to.The Region's Household Drainage Survey, or an assessment by a licensed plumber, shows whether weeping tile or downspouts run into the sanitary sewer.
- 2Get a flat-rate price.One price for the work, before any of it starts.
- 3The work is done under a permit.Work on the main drain needs a plumbing permit from your town or city, and it has to pass its final inspection.
- 4Keep the paperwork.The application asks for an itemized invoice paid in full, the permit sign-off, and before-and-after evidence of the work. Ask for all three when you book.
- 5Apply to Halton Region.Send the application and waiver forms within one year of the work being completed.
The plumbing side
What the work costs before the subsidy
A backwater valve typically runs $2,000 – $4,500 before HST. It costs more when the drain is deep or the floor is finished. Halton's subsidy can pay back up to $1,600 of that.
A replacement sump pump on its own is from $710 before HST. Disconnecting weeping tile and adding a new pit and discharge line is a bigger job, priced on site once we have seen where the tile runs.
Either way you approve a flat-rate price before any work starts. The subsidy is paid to you by the Region afterward. It does not come off our invoice.
Questions
Halton subsidy questions
Who can apply for the Halton basement flooding subsidy?
Owners of homes in Burlington, Oakville, Milton and Halton Hills that are connected to Halton Region's municipal wastewater system. Homes on a septic system are not eligible.
Can I apply after the work is done?
Yes. Halton Region accepts applications up to one year after the work was completed. Keep the paid, itemized invoice and the permit paperwork.
How much does Halton pay toward a backwater valve?
Half the cost, up to $1,600, for a valve installed inside the house on work completed after July 15, 2024. The Region asks for proof that downspouts and weeping tile are not connected to the sanitary sewer, or will be disconnected first.
Does a backwater valve installed outside the house qualify?
No. Halton Region's backwater valve subsidy covers interior installations only.
How do I find out what my house is connected to?
Through the Region's Household Drainage Survey where it is offered, or a plumbing or drainage assessment by a licensed plumber or a qualified drainage contractor. A camera inspection shows where the weeping tile and the main drain go.

